design and specifications are each subject to change without notice. ask factory for the current technical specifications before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. aluminum electrolytic capacitors (smd type) 330 hd j capacitance (?) rated voltage code series identi?ation mark for lead-free products (black dot) lot number negative polaritymarking (? a?.2 w ( ) reference size l 0 d?.5 h b?.2 (i) k (p) (i) + 0.3 max. pressure relief ( 0 10 and larger) dimensions marking endurance : 105 c 5000 h vibration-proof product is available upon request. ( 0 8 mm and larger) rohs compliant features specii cations surface mount type series : hd type : v ? 6.3 v.dc to 35 v.dc : high temperature lead-free re ow (suffix : a ) 50 v.dc to 100 v.dc : standard lead-free re ow example : 6.3 v.dc 330 ? marking color : black category temperature range ?0 ? to +105 ? rated voltage range 6.3 v.dc to 100 v.dc capacitance range 1 ? to 1000 ? capacitance tolerance ?0 % (120 hz/+20 ?) leakage cur rent i < 0.01 cv or 3 (?) after 2 minutes (whichever is greater) dissipation factor (tan ) please see the attached characteristics list characteristics at low temperature v.dc 6.3 10 16 25 35 50 63 100 (impedance ratio at 120 hz) z(?5 ?)/z(+20 ?) 33222222 z(?0 ?)/z(+20 ?) 44333333 endurance after applying rated working voltage for 5000 hours at +105 ?? ? and then being stabilized at +20 ?, capacitors shall meet the following limits. capacitance change within ?0 % of the initial value tan < 300 % of the initial limit dc leakage current < initial speci ed value shelf life after storage for 1000 hours at +105 ?? ? with no voltage applied and then being stabilized at +20 ?, capacitors shall meet the limits speci ed in endurance. (with voltage treatment) capacitance change within ?0 % of the initial value tan < 200 % of the initial limit dc leakage current within the initial limit resistance to soldering heat after re ow soldering and then being stabilized at +20 ?, capacitors shall meet the following limits. capacitance change within ?0 % of the initial value tan within the initial limit dc leakage current within the initial limit aec-q200 aec-q200 compliant size code 0 d l a, b h i w p k b 4.0 5.8?.3 4.3 5.5 max. 1.8 0.65?.1 1.0 0.35 - 0.20 c 5.0 5.8?.3 5.3 6.5 max. 2.2 0.65?.1 1.5 0.35 - 0.20 d 6.3 5.8?.3 6.6 7.8 max. 2.6 0.65?.1 1.8 0.35 - 0.20 d8 6.3 7.7?.3 6.6 7.8 max. 2.6 0.65?.1 1.8 0.35 - 0.20 e 8.0 6.2?.3 8.3 9.5 max. 3.4 0.65?.1 2.2 0.35 - 0.20 f 8.0 10.2?.3 8.3 10.0 max. 3.4 0.90?.2 3.1 0.70?.20 g 10.0 10.2?.3 10.3 12.0 max. 3.5 0.90?.2 4.6 0.70?.20 + 0.15 + 0.15 + 0.15 + 0.15 + 0.15 frequency (hz) 50, 60 120 1 k 10 k to correction factor 0.70 1.00 1.30 1.70 frequency correction factor for ripple current (unit : mm) r. voltage (v.dc) 6.3 10 16 25 35 50 63 100 code j acevhj2a mar. 2016 05 downloaded from: http:///
$ o x p l q x p ( o h f w u r o \ w l f & |